Excavator Attachments

EXCAVATOR ATTACHMENTS FOR EVERY APPLICATION
Drill Connex offer a massive range of Drilling Attachments for Hydraulic Excavators, Skid Steer Units, Telehandlers, Spider Cranes/Rigs and more. Our Drill Attachment applications are Anchor Bolt Drilling, Augering, Blast Hole Drilling, DTH Drilling, Rotary Drilling, Percussion Drilling, RC Drilling, Solar Install Applications & Rock Splitter Borehole Drilling to mention a few.
Drill Connex drill attachments come as a standard package or custom built to suit your specific needs.
Drill Connex offer Rotary, Rotary/Percussion, Percussion & Pneumatic packages.
Contact Drill Connex today to discuss the scope of your project/s and therefore find a suitable solution.
Showing all 16 results
-
Build Your Own Drill Mast
The Component Kit includes an anodised Aluminium Profile (mast), Carriage Plate for the Doofor Rock Drill Drifter, Feed Motor, Feed Chain and Housings for the Feed Chain. The ground support module, Hydraulic Valve Block, Casing and Hydraulic Hoses are also pre-designed for a convenient drill mast construction.
SKU: Build your own mast - Doofor Kit-2 Categories: Drill Mast Building Equipment, Excavator Attachments -
EXDC50 (Tiny) Drilling Attachment
The EXDC50 Drilling Attachment is a extremely small and lightweight Drilling Attachment for small excavators and small diameter boreholes to shallow depths of just 1.8m or less.
This small attachment offers an Aluminium Mast with a 10kW Doofor Hydraulic Drifter.
Hole Diameters: 35–57 mm (1.4–2.2 in)
Drifter: 10 kW (13.4 HP)
RPM: 0–250 RPM
Maximum Drill Depth: 1.8 m (5.9 ft)
Weight: 1,000 kg (2,205 lb)
Carrier Size: 5–10 tonnes -
Auger Drive DTH Drilling Kit
The equipment attaches to your standard Auger Drive Head on your Skid Steer or Hydraulic Excavator. It is ideal for drilling boreholes of 76mm to 152mm in diameter.
Custom packages adapt to your current equipment.
Options available for special applications and depths.
DTH Hammer Size: 2.5–4 in
Hole Diameters: 76–152 mm (3.0–6.0 in)
Compatibility: Works with your Auger Drive
Maximum Depth: Up to 1.8 m (5.9 ft) -
EX37 Drill Attachment (Steel)
The EX37 Drill Attachment with the Steel Mast is custom built to fit your excavator model, these Excavator Attachments offer solutions for a variety of rock drilling applications.
Hole Diameter Range – Rotary: Typically 70–140 mm (2.8–5.5 in)
Hole Diameter Range – Percussion: Typically 32–64 mm (1.3–2.5 in)
Hole Depth Range – Rotary: Typically 0–12 m (0–39.4 ft), depending on diameter
Hole Depth Range – Percussion: Typically 0–12 m (0–39.4 ft)
Excavator Size: Typically 6–15 tonnes (has been fitted to 4-tonne excavators, depending on options included)
Standard Stroke Length: 3.2 m (10.5 ft); other lengths available
Standard Mast Length: 4,410 mm (14.5 ft); longer and shorter lengths available
Rotation Speeds: 0–1,000 RPM, depending on rotary head model
Feed Extension: 600 mm (2.0 ft)Category: Excavator Attachments -
EX37 Drill Attachment (Aluminium)
The EX37 Drill Attachment is custom built to fit your excavator model, these Excavator Attachments offer solutions for a variety of rock drilling applications such as:
Hole Diameter Range – Rotary: Typically 70–140 mm (2.8–5.5 in)
Hole Diameter Range – Percussion: Typically 32–64 mm (1.3–2.5 in)
Hole Depth Range – Rotary: Typically 0–12 m (0–39.4 ft), depending on hole diameter
Hole Depth Range – Percussion: Typically 0–12 m (0–39.4 ft)
Excavator Size: Typically 6–15 tonnes (has been fitted to 4-tonne excavators, depending on options included)
Standard Stroke Length: 3.2 m (10.5 ft); other lengths available
Standard Mast Length: 4,410 mm (14.5 ft); longer and shorter lengths available
Rotation Speeds: 0–1,000 RPM, depending on rotary head model
Feed Extension: 600 mm (2.0 ft)Category: Excavator Attachments -
Ripamonti EX121 SD180 Drilling Attachment
The Ripamonti EX121/SD180 is a drilling kit designed for the use of 3″, 4″ and, 5″ DTH Hammers or Percussion Hydraulic Drifters for the smaller diameter holes. Ripamonti uses its Speedy Drill 180 aluminum profile/mast with a chain feed by means of a gear motor and side pipe holder, designed to be attached onto small capacity excavators of greater than 5 tons.
The EX121/SD180 is an extremely light and compact unit, and it is available in various versions to meet your construction site needs.
DTH Hole Diameters: 76–152 mm (3.0–6.0 in)
Drifter Hole Diameters: 35–57 mm (1.4–2.2 in)
Carrier: 5-tonne excavator or larger
Stroke: 2.3–3.3 m
Controls: Radio remote control -
Ripamonti EX121 SD250 Drilling Attachment
The Ripamonti EX121/SD250 Drill attachment is a drill mast attachment designed to be mounted on medium-duty excavators or carriers.
The EX121/SD250 is extremely versatile and compact. The EX121/SD250 is available in various versions to meet your construction site needs.
DTH Hole Diameters: 76–180 mm (3.0–7.1 in)
Drifter Hole Diameters: 35–57 mm (1.4–2.2 in)
Carrier: 7-tonne excavator or larger
Stroke: 2.3–3.3 m
Controls: Radio remote control -
WORD EX57 Drilling Attachment
The WORD EX57 Excavator Drilling Attachment is a versatile, USA-manufactured drilling system designed for DTH drilling, rotary drilling, anchor drilling and construction applications.
Custom-built to suit your excavator, the EX57 provides a flexible drilling solution for contractors working on road construction, retaining walls, ground anchoring and rock drilling projects throughout New Zealand.
With typical DTH and rotary drilling diameters of 76–172 mm, the EX57 can be configured with different rotary heads, hydraulic drifters, mast lengths and optional equipment to suit specific drilling requirements.
DTH/Rotary Hole Diameters: 76–172 mm (3.0–6.8 in)
Drifter Hole Diameters: 45–127 mm (1.8–5.0 in)
Carrier: 12-tonne excavator or larger
Stroke: 3.2 m standard (additional options available)
Controls: Radio remote controlSKU: WORD EX57 Drill Attachment Category: Excavator Attachments Tags: Anchor Drill, Drill Attachment, DTH Drill, EX57, Excavator Drill Attachment, Rotary Drill -
Ripamonti EX224 Excavator Drill Attachment
The Ripamonti EX224 Drilling Attachment is built for excavators over 5 ton. The EX224 offers a standard 3.1m stroke length with a single rotator, proportional hydraulics and radio remote controls.
As usual with all Ripamonti equipment a wide range of optional extras are available along with several Rotary Head options and Hydraulic Drifter options.
DTH Hole Diameters: 76–180 mm (3.0–7.1 in)
Drifter Hole Diameters: 35–57 mm (1.4–2.2 in)
Carrier: 5-tonne excavator or larger
Stroke: 3.3 m standard
Controls: Radio remote control -
Ripamonti EX224 S200 Drilling Attachment
The Ripamonti EX224 SD200 Drilling Attachment is a reasonably light weight Drilling Attachment for connection with Excavators, Telehandlers and other carriers.
There is a choice of drilling techniques by utilising a Hydraulic Rotary Head for Rotary Drilling OR a Hydraulic Rotary/Percussion Head for Rotary Percussive Drilling OR a Hydraulic Drifter for high-speed small diameter borehole drilling into Hard Rock.
This unit also offers Mast Rotators, Feed Extensions, Clamp Breakers, Remote Controls, a Variable Stroke Mast, Line Oilers and more.
DTH Hole Diameters: 76–180 mm (3.0–7.1 in)
Drifter Hole Diameters: 35–89 mm (1.4–3.5 in)
Carrier: 12-tonne excavator or larger
Stroke: 3.3 m standard
Controls: Radio remote control -
Ripamonti EX224 SD250 Drilling Attachment
The Ripamonti EX224 SD250 Drilling Attachment is a reasonably light weight Drilling Attachment for connection with Excavators, Telehandlers and other carriers.
There is a choice of drilling techniques by utilising a Hydraulic Rotary Head for Rotary Drilling OR a Hydraulic Rotary/Percussion Head for Rotary Percussive Drilling OR a Hydraulic Drifter for high-speed small diameter borehole drilling into Hard Rock.
This unit also offers Mast Rotators, Feed Extensions, Clamp Breakers, Remote Controls, Line Oilers and more.
DTH Hole Diameters: 76–180 mm (3.0–7.9 in)
Drifter Hole Diameters: 45–102 mm (1.4–4.0 in)
Rotary Percussion: 64–102 mm (2.5–4.0 in)
Carrier: 10-tonne excavator or larger
Stroke: 1.5 m standard (3.3 m optional)
Controls: Radio remote control -
Ripamonti EX321 S300 Drilling Attachment
The Ripamonti EX321 Drilling Attachment is a drilling kit designed to be mounted on large capacity excavators.
The EX321 S300 is an extremely versatile and compact unit and it is available in various versions to meet your construction site needs.
DTH Hole Diameters: 76–240 mm (3.0–9.4 in)
Drifter Hole Diameters: 45–102 mm (1.8–4.0 in)
Carrier: 20-tonne excavator or larger
Stroke: 3.3 m standard
Controls: Radio remote control -
Ripamonti EX321 S300HR Drilling Attachment
The Ripamonti EX321 S300HR is a drilling kit designed to be mounted on Menzi Muck, Spider Excavators or large capacity Excavators.
The Ripamonti EX321 S300HR is extremely versatile and compact, it is available in various versions to meet your construction site needs. This unit comes with a support foot for the rod changer.
Drifter Hole Diameters: 45–102 mm (1.8–4.0 in)
Carrier: 24-tonne excavator or larger
Stroke: 3.05 m standard, with 3.66 m optional
Controls: Radio remote controlSupport Leg for Menzi Muck
-
WORD EX125 Drilling Attachment
The WORD EX125 Excavator Drilling Attachment is a powerful, USA-manufactured drilling system designed for DTH drilling, rotary drilling, anchor drilling and construction applications.
Custom-built to suit your excavator, the EX125 offers a versatile and cost-effective drilling solution for contractors working on road construction, retaining walls, ground anchoring and rock drilling projects throughout New Zealand.
Featuring a high-torque rotary head with up to 14,400 ft-lb (19,524 Nm) of torque, the EX125 can be configured for DTH and rotary drilling diameters from 76 mm to 300 mm.
DTH/Rotary Hole Diameters: 76–300 mm (3.0–11.8 in)
Drifter Hole Diameters: 45–127 mm (1.8–5.0 in)
Carrier: 12-tonne excavator or larger
Stroke: 3.20 m standard (additional options available)
Controls: Radio remote control with built in InclinometerSKU: EX125 Drill Attachment Category: Excavator Attachments Tags: Anchor Drill, DTH Drill, EX125, Rotary Drill, Word Drill Attachment, Word EX125 -
Klemm KA140 Drilling Attachment
KLEMM Drilling attachment systems of the KA series are very easy to adapt to existing excavators as the carrier devices because all interfaces (mechanical, electrical and hydraulic) are available and prepared for use.
The excavator mounted Drilling Attachment allows for many solutions, especially for difficult drilling positions. The long reach and 360 degree ability of the excavator not to mention the ability to reach over, above and below itself offers drilling in almost all locations.
Micro-piles, Anchors, Soil Nails
High Torque Rotary HeadsHole Diameters: up to 350mm
Length: 5,500 mm (5.5 m)
Travel Length: 4,500 mm (4.5 m)
Feed Force: 30 kN (6,744 lbf)
Retractive Force: 30 kN (6,744 lbf)
Feed Speed: 13 m/min
Fast Feed Speed: 40 m/min
Electrical: 24 V systemExcavator Weight: 16 tonnes or larger
Hydraulic Flow: 140–250 L/min
Maximum Hydraulic Pressure: 250 barCategory: Excavator Attachments -
Klemm KA162 Drill Attachment
KLEMM Drilling attachment systems of the KA series are very easy to adapt to existing excavators as the carrier devices because all interfaces (mechanical, electrical and hydraulic) are available and prepared for use.
The excavator mounted Drilling Attachment allows for many solutions, especially for difficult drilling positions. The long reach and 360 degree ability of the excavator not to mention the ability to reach over, above and below itself offers drilling in almost all locations.
Micro-piles, Anchors, Soil Nails
High Torque Rotary HeadsLength: 5,500 mm (5.5 m)
Travel Length: 4,450 mm (4.45 m)
Feed Force: 60 kN (13,489 lbf)
Retractive Force: 60 kN (13,489 lbf)
Feed Speed: 7 m/min
Fast Feed Speed: 36 m/min
Electrical: 24 V system
Magazine: NoExcavator Weight: 28 tonnes or larger
Hydraulic Flow: 140–280 L/min
Maximum Hydraulic Pressure: 270 bar
Working Pressure: 220–270 bar
















