WORD EX125 Drilling Attachment

The WORD EX125 Excavator Drilling Attachment is a powerful, USA-manufactured drilling system designed for DTH drilling, rotary drilling, anchor drilling and construction applications.

Custom-built to suit your excavator, the EX125 offers a versatile and cost-effective drilling solution for contractors working on road construction, retaining walls, ground anchoring and rock drilling projects throughout New Zealand.

Featuring a high-torque rotary head with up to 14,400 ft-lb (19,524 Nm) of torque, the EX125 can be configured for DTH and rotary drilling diameters from 76 mm to 300 mm.

DTH/Rotary Hole Diameters: 76–300 mm (3.0–11.8 in)
Drifter Hole Diameters: 45–127 mm (1.8–5.0 in)
Carrier: 12-tonne excavator or larger
Stroke: 3.20 m standard (additional options available)
Controls: Radio remote control with built in Inclinometer

WORD EX125 Excavator Drilling Attachment

The WORD EX125 Excavator Drilling Attachment is a powerful, USA-manufactured drilling system designed for DTH drilling, rotary drilling, anchor drilling and construction applications.

Custom-built to suit your excavator, the EX125 offers a versatile and cost-effective drilling solution for contractors working on road construction, retaining walls, ground anchoring and rock drilling projects throughout New Zealand.

Featuring a high-torque rotary head with up to 14,400 ft-lb (19,524 Nm) of torque, the EX125 can be configured for DTH and rotary drilling diameters from 76 mm to 300 mm.

A wide selection of rotary heads, hydraulic drifters, mast lengths and optional equipment allows the EX125 to be tailored to specific drilling requirements.

EX125 Drilling Applications

The WORD EX125 excavator-mounted drilling attachment can be configured for several drilling methods, including:

  • DTH Drilling: Down-the-hole hammer drilling for rock and hard ground conditions.
  • Rotary Drilling: Using PDC bits, drag bits and other rotary drilling tools.
  • Auger Drilling: For suitable ground conditions (Soil) and construction applications.
  • Percussion Drilling: Using optional hydraulic drifters for rock drilling applications of smaller hole sizes.

Typical Construction Applications

  • Roadside anchor drilling, above and below road level
  • Retaining wall drilling and piling applications
  • Self-drilling anchor and hollow bar installation
  • Soil nailing and ground stabilisation
  • Rock drilling and blasthole drilling
  • Foundation and general construction drilling
  • Dewatering and other ground engineering applications

EX125 Features and Optional Equipment

The WORD EX125 offers a comprehensive range of optional equipment, allowing each drilling attachment to be configured for the intended application.

Drilling Equipment Options

  • Hydraulic double breakout clamps
  • Single Hydraulic Clamp
  • Interchangeable rotary drilling heads
  • Hydraulic drifters with quick-change mounting systems
  • Dual feed motor options
  • Air swivel and line oiler systems
  • Drill rod centralisers

Mast and Positioning Options

  • 360° mast rotators, single or double configurations
  • Multiple mast and feed lengths
  • Extended mast feed options up to 6.4 m
  • Excavator mounting systems, including WEM mounts
  • X/Y drilling angle indicators

Hydraulic and Control Options

  • 16 Function Radio remote control with built in Inclinometer
  • Water mist dust suppression systems
  • Dry dust extraction systems
  • Hydraulic hose energy chains
  • Pressure washer attachment
  • Shipping and storage platforms

WORD EX125 Technical Specifications

Specification Details
DTH / Rotary Hole Diameter Typically 76–300 mm
Hydraulic Drifter Hole Diameter Typically 38–127 mm
Rotary Drilling Depth 30 m+ depending on conditions
Percussion Drilling Depth 20 m+ depending on conditions
Excavator Compatibility Typically 15 tonnes or larger; configuration dependent
Standard Feed Stroke 3,200 mm
Standard Mast Length 4,410 mm
Maximum Pullback 3,175 kg
Rotation Speed Adjustable, up to 300 rpm, typically 75rpm for Rotary or DTH Drilling
Maximum Rotation Torque Up to 14,400 ft-lb (19,524 Nm)
Rotary Head Weight Approx. 136 kg (M125)
Shank / Connection 2 7/8″ API
Feed Extension 600 mm
Standard Controls 12-function radio remote control
Extended Mast Option Up to 6.4 m feed length
Attachment Weight Configuration dependent; approximately 1,960–2,470 kg
Country of Manufacture USA

Specifications are indicative and depend on the selected rotary head, hydraulic drifter, mast configuration and excavator hydraulic capabilities. Maximum rotation torque and speed are configuration-dependent and may not be available simultaneously. Drilling depths depend on ground conditions, drilling method and tooling.

Custom-Built Excavator Drilling Attachments

At Drill Connex, we work closely with our customers to identify the most suitable WORD EX125 drilling attachment configuration for their project.

By understanding your excavator model, drilling method, required hole diameters and drilling depths, we can recommend an equipment package that meets your operational requirements.

The USA-manufactured WORD EX125 offers a powerful, flexible and cost-effective alternative to purchasing a dedicated drilling rig for suitable applications.

Contact Drill Connex today to discuss your project requirements and request a customised quotation for the WORD EX125 Excavator Drilling Attachment.

Videos

Product Brochures

Scroll to Top