Top Hammer Drill Tubes
Drill Connex offer a range of Top Hammer Drill TUBES where a smooth continuous drill tube diameter is required with drill tube joints that butt up flush with each other. Our Drill Tubes are also matched with purpose built Drill Bits with a flat back end to match the Drill Tube face. If you have problematic drilling the Drill Tubes maybe a solution for you as opposed to standard top hammer drilling rods.
Showing all 3 results
-
DT58 Drill Tubes
DT58 Drill Tubes are a range of top-hammer drilling tubes with 76 mm (3″) drill tubes available in 1220, 1525 and 1830 mm lengths, weighing 32–38 kg. The range also includes DT58 shanks for Atlas Copco COP2550UX and Sandvik HL1500/HL1500PE systems, a DT58-to-DT68 bit adapter, and guide tubes in 60 mm and 76 mm diameters.
-
DT68 Drill Tubes
DT68 Drill Tubes are top-hammer drilling tubes available with DT68 shanks and drill tubes in 1220, 1525 and 1830 mm lengths. The range includes 76 mm (3″) and 87 mm (3½”) diameter tubes, with weights from 40–42 kg, plus matching guide tubes in 76 mm diameter weighing 39–41 kg. The page also lists a Sandvik HL1500ST DT68 shank measuring 635 mm long × 90 mm diameter, weighing 22 kg.
-
DT90 Drill Tubes
DT90 Drill Tubes are top-hammer drilling tubes with an 80 mm diameter (3 3/20″) and a 4265 mm (14 ft) length. The listed DT90 tube weighs 114 kg and is identified by part number DR80-4265-DT90DT90W.



