The Resemin Cable Bolter R44 Rig is the perfect solution for mechanised installation of Cable Bolts in medium size sections from 3m x 3m.
The Cable R44 Rig includes an arm equipped with a long hole feed for 4 ft rods (1.2m), in addition a second arm with a cable pusher mechanism and hose to perform the injection of cement/grout.
The maximum drilling length is up to 22m with hole diameters up to 64mm, or reamed to 127mm.
Other features are:
- Strong chassis for heavy duty applications,
- Articulated 4WD,
- Self propelled with diesel engine,
- Electro hydraulic for drilling.
- Montabert HC50 drifter which has the lowest operating cost of its kind in the market.
Basic Technical Specifications:
- Hydraulic Drifter: Montabert HC50, 12kW, 130bar, 56Hz (3360bpm), 466Nm Torque, 0-237rpm
- Hole Diameters: 33mm – 64mm
- Air Consumption, flushing: 83.3 l/sec (7 bar)
- Shank: T38 – male
- Drifter Weight: 104kg (HC50)
- Feed: RE8000 series
- Feed Extension: 400mm
- Digital Inclinometer: AMLH System
- Rod Length: 1.2m (4′)
- Rod Magazine: T38 / 14 + 1 rods
- Carrier: Model C44.4
- Diesel Engine: CAT C4.4 ACERT, Tier 3
- Exhaust Catalyser: Standard
- Transmission: Hydrostatic
- Emergency & Parking Brakes: SAHR
- Steering: articulated carrier =/- 38 degrees
- Tyres: 8.25 x R15
- Electric Motor: 75kW (100hp), voltage 380 – 1000 VAC (options), 50 – 60 Hz
- Electric Cable: 3 x 4/0 – AWG (95mm), 65m length
- Degree of Protection: IP 55
- Water & Air System: Electric Compressor CT6B.23, 8 bar, Grundfoss pump CR 5 – 9, 115 l/min @ 3500rpm
- Weight: 11,800kg
For a full list of the Cable R44 Rig Technical Specifications view the PDF Document on the previous page….
