RC Hammers – Reverse Circulation Drilling Hammers
Drill Connex supplies a comprehensive range of RC Hammers (Reverse Circulation Hammers) from its two long term suppliers for grade control, mineral exploration and reverse circulation drilling applications throughout New Zealand.
Our RC Drilling Hammers are designed for high-performance percussion drilling, efficient rock penetration and reliable sample recovery in demanding ground conditions.
With a range of hammer sizes and configurations available, Drill Connex can assist customers in selecting suitable RC drilling equipment to achieve excellent performance, durability and value for money.
RC Hammer Size Range
Our range of Reverse Circulation Hammers includes the following nominal sizes:
- 4″ RC Hammer – 99 mm outside diameter
- 4½” RC Hammer – 116 mm outside diameter
- 5″ RC Hammer – 126 mm outside diameter
- 6″ RC Hammer – 146 mm outside diameter
Hammer dimensions and specifications vary depending on the selected model.
RC Hammer Features and Benefits
Our RC Hammers offer several advantages for grade control and exploration drilling:
- Efficient Rock Penetration: Pneumatic percussion provides effective drilling performance in a range of rock formations.
- Reliable Sample Recovery: Internal sample tubes transport rock cuttings to the surface while helping minimise sample contamination.
- Durable Construction: Designed for demanding drilling conditions and continuous operation.
- Versatile Applications: Suitable for in-pit grade control, mineral exploration and geological sampling.
- Serviceable Design: Replaceable internal components help simplify maintenance and reduce operating costs.
Recommended RC Hammer Lubrication and Maintenance
Correct lubrication and maintenance are essential for maintaining RC Hammer performance and service life.
General recommendations include:
- Hammer Oil: ISO VG 320 rock drill oil for typical operating conditions.
- Cold Climate Operation: A lower-viscosity rock drill oil, such as ISO VG 220, may be suitable where approved by the hammer manufacturer.
- Lubrication Rate: Typically 2 litres per hour using an automatic lubrication system, subject to the hammer model and operating conditions.
- Fluid Injection: Increase lubrication when injecting water, foam or polymers. Some hammer manufacturers recommend doubling the normal oil flow.
- Storage: Clean, dry and lubricate the hammer before storage to help prevent internal corrosion. Protect the connections from contamination and follow the manufacturer’s storage instructions.
Always refer to the relevant manufacturer’s operating manual for model-specific lubrication, maintenance and storage requirements.
RC Hammer Specifications – 543 RC Hammer Example
The following technical specifications illustrate a typical 543 Reverse Circulation Hammer.
| Specification | Details |
|---|---|
| Hammer Length (excluding bit) | 1191 mm |
| Hammer Weight (excluding bit) | 62.2 kg |
| Outside Diameter | 116 mm |
| Drill Bit Shank | RE543 |
| Recommended Hole Diameter | 120–135 mm |
| Connection Options | Metzke or Remet – model-dependent |
| Operating Air Pressure | 1.5–3.5 MPa (217–507 psi) |
| Impact Frequency at 2.4 MPa | 35 Hz (2100 blows/min) |
| Recommended Rotation Speed | 25–40 rpm |
RC Hammer Air Consumption
| Operating Pressure | Air Consumption |
|---|---|
| 1.7 MPa (247 psi) | 14 m³/min (494 cfm) |
| 2.4 MPa (348 psi) | 19 m³/min (671 cfm) |
| 3.0 MPa (435 psi) | 24 m³/min (848 cfm) |
RC Hammers and Drilling Equipment – Contact Drill Connex
For assistance with RC Hammers, RC Drill Bits, Shrouds, Hammer Subs, RC Drill Pipes and Inner Tubes, contact the experienced Drill Connex team.
We can help identify suitable reverse circulation drilling equipment for your application, provide technical advice, offer competitive pricing and dependable customer support throughout New Zealand.


