Hand Held Rock Tools – Shank Rods

Drill Connex supplies an extensive range of Handheld Rock Drilling Tools, including Hex 22 (H22) Shank Rods for use with compatible pneumatic and hydraulic handheld rock drills.

Our threaded shank rods are available in various lengths with R25 and R32 thread options. Designed for use with replaceable threaded rock drill bits, they provide a versatile and cost-effective solution for small-diameter rock drilling applications.

SKU: Shank Rods Category: Tags: , , ,

Handheld Rock Drill Shank Rods – Hex 22 (H22)

Drill Connex supplies an extensive range of Handheld Rock Drilling Tools, including Hex 22 (H22) Shank Rods for use with compatible pneumatic and hydraulic handheld rock drills.

Our threaded shank rods are available in various lengths with R25 and R32 thread options. Designed for use with replaceable threaded rock drill bits, they provide a versatile and cost-effective solution for small-diameter rock drilling applications.

Shank Rod Specifications

Our standard range includes:

  • Shank Type: Hex 22 (H22)
  • Thread Options: R25 and R32
  • Rod Lengths: 600 mm, 1200 mm, 1800 mm, 2400 mm and 3000 mm
  • Drill Bit Compatibility: Matching R25 and R32 threaded rock drill bits
  • Applications: Handheld pneumatic and hydraulic rock drilling

Shank Rod Features and Benefits

Our threaded shank rods offer several advantages over traditional integral drill steels.

  • Flexible Drill Bit Sizes: Use compatible threaded drill bits of different diameters to suit your borehole requirements.
  • Various Drill Bit Designs: Choose from button bits, cross face bits and different flushing hole configurations to suit the rock conditions.
  • Lower Replacement Costs: Worn drill bits can be replaced individually without replacing the entire shank rod, provided the rod remains serviceable.
  • Multiple Rod Lengths: Progressively longer shank rods allow operators to drill deeper while maintaining a more manageable working height.

Recommended Shank Rod Drilling Method

For drilling deeper boreholes, Drill Connex recommends using progressively longer shank rods rather than starting with one long rod or increasing in large steps.

Our recommended drilling sequence:

  1. Start with a 600 mm shank rod fitted with a compatible threaded drill bit.
  2. Drill the initial section of the borehole.
  3. Stop drilling, disconnect the rock drill and withdraw the shank rod and attached bit.
  4. Insert a 1200 mm shank rod fitted with a matching drill bit.
  5. Reconnect the rock drill and continue drilling.
  6. Repeat the process using 1800 mm, 2400 mm or longer shank rods until the required drilling depth is achieved.

Drill Connex Tip: Where practical, purchase a suitable threaded drill bit for each shank rod and fit the bits before drilling begins. This allows faster changeovers and reduces downtime between rod changes.

Need Help Selecting the Right Shank Rods?

The experienced Drill Connex team can assist with selecting the correct shank rod lengths, thread types and compatible rock drill bits for your application.

Contact Drill Connex for expert advice and competitive pricing on handheld rock drilling tools throughout New Zealand.

Scroll to Top