Beretta WL219 SP Wireline Drill Rig

The Beretta WL219 SP Wireline Drill Rig is a portable, modular drilling rig designed for NQ, HQ and PQ diamond core drilling in remote and difficult-to-access locations.

Built for mineral exploration and geological investigation, the WL219 SP combines reliable hydraulic performance with exceptional portability. Its modular construction allows the rig to be dismantled for manual transport through forests, mountainous terrain and other restricted-access drilling sites.

The rig can also be transported in separate loads using a suitable helicopter with an 800 kg lifting capacity, subject to component weights and lifting requirements.

Beretta WL219 SP Wireline Drill Rig

The Beretta WL219 SP Wireline Drill Rig is a portable, modular drilling rig designed for NQ, HQ and PQ diamond core drilling in remote and difficult-to-access locations.

Built for mineral exploration and geological investigation, the WL219 SP combines reliable hydraulic performance with exceptional portability. Its modular construction allows the rig to be dismantled for manual transport through forests, mountainous terrain and other restricted-access drilling sites.

The rig can also be transported in separate loads using a suitable helicopter with an 800 kg lifting capacity, subject to component weights and lifting requirements.

Wireline Core Drilling Capacities

The Beretta WL219 SP offers the following drilling depths:

Wireline Core Size Maximum Drilling Depth
PQ 100 m
HQ 200 m
NQ 250 m

Drilling depths are manufacturer-rated figures and may vary depending on ground conditions, drilling equipment and operating configuration.

Beretta WL219 SP Key Features

Portable and Modular Design

The compact, skid-mounted design makes the WL219 SP suitable for exploration drilling in remote locations.

The structural-steel skid can be dismantled for easier transportation. Its hydraulic mast positioning system operates between 0° and 90°, while two tie-rods secure the mast during drilling.

Powerful Top-Drive Rotary Head

The Beretta 23-2V hydraulic rotary head features a floating shaft that accommodates drill-rod thread engagement.

The rotary head can also be moved sideways, providing clear access for wireline core recovery using an overshot.

Depending on the selected hydraulic power configuration, the rotary head delivers speeds up to 1,250 rpm and maximum drilling torque of 400 Nm.

High-Performance Mast Feed System

The hydraulic mast uses a chain-feed system with a reduction gearbox, brake and hydraulic motor.

The mast provides a 2,000 mm working stroke, accommodates 1.5-metre drill rods and delivers a maximum pulling force of 40 kN (approximately 4 tonnes-force).

Efficient Wireline Core Recovery

The hydraulic wireline winch features 260 metres of 5 mm diameter wire rope and an 800 kg pulling capacity.

This system allows core samples to be recovered using an overshot without removing the complete drill string.

Reliable Kubota Diesel Power Units

The standard WL219 SP configuration includes two independent 40 HP Kubota V1505 turbo-diesel hydraulic power units, delivering a combined 80 HP.

A third 40 HP power unit can be added to increase total installed engine power to 120 HP.

Alternatively, a single 100 HP Kubota turbo-diesel power unit is available, with wheeled or tracked configurations.

Beretta WL219 SP Technical Specifications

Hydraulic Power Units

Each standard hydraulic power unit includes a 40 HP Kubota V1505 turbo-diesel engine and a dual Casappa gear pump.

A separate 100-litre hydraulic oil tank incorporates a dual water/oil heat exchanger. Each power unit also has 7-metre hydraulic connections to the control panel and oil tank.

Mast and Skid Assembly

  • Mast working stroke: 2,000 mm
  • Maximum mast pull: 40 kN
  • Drill rod length: 1.5 m
  • Mast positioning: 0°–90°
  • Skid construction: Removable structural steel
  • Ground anchoring: Steel anchor bolts

Beretta 23-2V Rotary Head

Specification 80 HP Configuration 100 HP / 120 HP Configuration
Hydraulic oil flow 120 L/min 160 L/min
Operating pressure 230 bar 230 bar
Maximum rotation speed 1,100 rpm 1,250 rpm
Maximum drilling torque 390 Nm 400 Nm
Maximum unscrewing torque 980 Nm 1,290 Nm

Hydraulic Tightening Vice

The hydraulic tightening vice provides a 90 kN closing force and accommodates NQ, HQ and PQ drill rod sizes.

Wireline Winch

  • Wire rope length: 260 m
  • Wire rope diameter: 5 mm
  • Maximum pulling capacity: 800 kg

Drilling Fluid Pump

The WL219 SP is equipped with a triplex piston drilling fluid pump delivering up to 90 L/min at 50 bar.

The pump is mounted on a compact wheeled support, complete with a directional control valve and water-volume counter.

Optional Equipment and Power Configurations

The Beretta WL219 SP can be configured to meet different drilling requirements.

Available options include:

  • Third 40 HP Kubota turbo-diesel hydraulic power unit, increasing total engine power to 120 HP.
  • Single 100 HP Kubota turbo-diesel hydraulic power unit.
  • Rubber-wheeled or tracked configuration for the optional 100 HP power unit.
  • 120-litre hydraulic oil tank with quadruple Casappa gear pump for the optional single power unit.

Designed for Remote Mineral Exploration

The Beretta WL219 SP combines a modular drilling system, reliable Kubota diesel engines and a straightforward hydraulic design.

Its compact configuration makes it particularly suitable for remote mineral exploration, diamond core drilling and geological sampling where access for conventional drilling rigs is limited.

The hydraulic system is designed to support demanding operating conditions, including extended drilling shifts.

Beretta WL219 SP – Enquire with Drill Connex

Drill Connex supplies Beretta Alfredo drilling equipment and can assist with selecting the most suitable WL219 SP configuration for your exploration project.

Contact our team for technical information, optional equipment, pricing or a quotation on the Beretta WL219 SP Wireline Drill Rig.

Product Brochures

Scroll to Top