The Doofor DF530X Rock Drill is a new generation high-power and high-frequency Rock Drill for general excavations and Dimensional Stone Quarrying.
The DF530X Rock Drill is equipped with a hexagonal (hex) female chuck for rod shank sizes of 108 mm x 22 mm or 25 mm.
The Rock Drill can use water or air flushing.
The DF530X Rock Drill has a through-piston flushing tube and is enhanced with flushing tube lubrication.
For this Rock Drill, Doofor offers carriage plates and a choice of hydraulic, pneumatic and mechanic steel retainers.
See your local Doofor Distributor (Drill Connex) for further information.
Optimal maximum hole diameter for the DF530X is 45 mm in hard rock.
 
SUITABLE APPLICATIONS:
Civil Engineering, Dimensional, Surface, Underground
 
 
TECHNICAL SPECIFICATIONS:
 
Nominal power class
10 kW
Percussion pressure
100-130 bar
(Percussion oil-flow)
(55 litres/min)
Rotation motor*
32 cm3
Speed
150-300 rpm
Torque*
175 Nm
Oil flow*
15 litres/min (max 25 litres/min)
Gear ratio
52/17
Lubrication
Air-oil mist, min. 125 g/h
Flushing air pressure.
5-12 bar
Flushing air flow
700-1200 litres/min
Flushing water pressure
5-12 bar
Flushing water flow max
40 litres/min
Weight
55 kg
*) Numbers given are for standard rotation motor (32 cm³) with an intermittent pressure of 140 bar [2031psi]. Motor options are 8 cm³, 12.5 cm³, 20 cm³, 32 cm³, 40 cm³ and 50 cm³. For professional use only as a component of a hydraulic system.
 
The feed force (pressure) must be adjustable during operation.
The rotation torque and oil flow values given are for a typical rotation motor.
See the full brochure for detailed information on different rotation motors.
The percussion pressure mentioned is a recommended value for a typical application. The product is intended for professional use by skilled personnel.
Doofor reserves all rights for changes without prior notice.