The Doofor DF530L Rock Drill is a new generation high-power and high-frequency rock drill for general excavations, Mining, and Quarrying work.
The DF530L Rock Drill is equipped with a separate side flushing box.
Flushing can be done with water or air.
The DF530L Rock Drill offers high torque combined with good rotation speed with two rotation motors.
The DF530L Rock Drill can be equipped with an R28 or an R32 male shank adapter (striker bar).
Optimal maximum hole diameter for the DF530L is 45 mm.
 
SUITABLE APPLICATIONS:
Civil Engineering, Surface, Underground
 
 
TECHNICAL SPECIFICATIONS:
Nominal power class
10 kW
Percussion pressure
100-130 bar
(Percussion oil-flow)
(45-55 litres/min)
Rotation motors
2*32 cm3
Speed
130-300 rpm
Torque*
181 Nm
Oil flow max*
2*15 litres/min (max 2*25 litres/min)
Gear ratio
52/22
Lubrication
Air-oil mist, min. 125 g/h
Flushing air pressure.
12 bar
Flushing air flow
1200 litres/min
Flushing water pressure
12 bar
Flushing water flow max.
40 litres/min
Weight
83 kg
*) Numbers given are for two standard rotation motors (32 cm³) with an intermittent pressure of 140 bar [2031psi]. Motor options are 12.5 cm³, 20 cm³, 32 cm³, 40 cm³ and 50 cm³. For professional use only as a component of a hydraulic system.
 
NOTE: The feed force (pressure) must be adjustable during operation.
The rotation torque and oil flow values given are for a typical rotation motor.
See full brochure for detailed information on different rotation motors.
The percussion pressure mentioned is a recommended value for a typical application. The product is intended for professional use by skilled personnel.
Doofor reserves all rights for changes without prior notice.