021 855 963
The solutions developed by PAGANI GEOTECHNICAL EQUIPMENT allow a single operator to perform penetrometric testing in the most difficult locations and conditions and yet be sure of attaining the required results with reduced costs and timeframes.
​
C000568-Extraction_head_for_rod-Ø36-1P
C000576-Friction_reducer_ring-Ø40
C000577-Inner rod-Ø15-X-30mm
C000578-Inner rod-Ø15-X-70mm
C000596-Nipple_for_rod-Ø32-M22
C000636-Helical rod 100x1000mm E.27
C000637-Helical rod 63x1000mm, E.22
C000638-Helical rod 63x750mm, E.22
C000805-Begemann cone-1P (ASSY)
C000809-Gravel cone-1P (ASSY)
C000829-Rod-Ø36-X-1000mm-1P
C000836-Inner rod-Ø15-X-1000mm
C000849-10cm2 recoverable cone, angle 60 degrees, M14
C000854-Friction_reducer_ring-Ø50
C000853-Hydraulic thrust selector with load cell 20 ton
C000860-X-RING for Piezocone
C000876-Casing tube 48x1000mm
C000877-Nipple_for_rod-Ø34-M22
C000879-20cm2 recoverable cone, angle 60 degrees M22
C000880-20cm2 recoverable cone, angle 60 degrees, M22
C000881-20cm2 recoverable cone, angle 90 degrees, M22
C000887-Extraction_head_with_ring_M22_for_rod-Ø32-E-Ø34
C000888-Rod_ending-Ø32-M22
C000889-Rod_ending-Ø34-M22
C000890-Rod_ending-Ø20-M14
C000894-Extraction_head_for_CPTu_tests-1P-Ø36
C000895-Extraction Head for CPT
C000898-Upper_centreing_ring_type_CE-Ø32
C000899-Upper_centreing_ring_type_CE-Ø34
C000900-Hexagonal_centring_ring-Ø32
C000902-Hexagonal_centre_ring_for_rod-Ø36-with_milling_for_cable
C000903-Hexagonal_centering_ring-Ø36
C000933-Helical anchor-Ø220mm-E.27-TG63
C000937-Brake helical rod 63-100mm
C000907-Sampler 33x200mm
C001008-Manual selector with load cell 20 ton
